GSM material range
Choose the PVC-coated polyester weight required for the finished cover.
Specify the finished size, edge build, reinforcement and fastening layout in one clear tarp specification.
PVC-coated polyester · 450–900 GSM · welded and finished to your agreed specification
For flatbeds, lumber, steel, equipment, cargo and repeat OEM supply.
Custom finished truck tarps are ready-to-install PVC-coated polyester covers built to an agreed finished specification. A complete specification defines the finished length and width, cover shape, material weight, hems, webbing, reinforced wear zones, eyelets, D-rings, flaps, pockets and quantity. A formal drawing is not required to start: a dimensioned hand sketch, an existing tarp photo or a vehicle photo gives the project a clear starting point. The finished layout is confirmed before production.
Choose the PVC-coated polyester weight required for the finished cover.
State length, width and drop or flap dimensions in the specification.
Define hems, webbing, corner patches and abrasion strips.
Place eyelets, D-rings, loops, pockets and tie-down points exactly.
A custom tarp programme defines the cover type, performance package and finished presentation together. It does not start with one stock size.
Specify a flatbed cover, lumber or steel cover, coil cover, equipment cover, dump cover or roll-tarp cover. Define the drop, flaps, cut-outs, pockets and finished profile.
Select PVC-coated polyester from 450–900 GSM with waterproof, UV-resistant, abrasion-resistant and flame-retardant options for the specified transport application.
Specify colour, printable logo area, label, SKU, export packing and repeat-order reference for a consistent fleet or OEM programme.
The tarp edge carries the pull from ropes, straps, hooks and vehicle anchor points. Specify each edge before production. State where the tarp needs a hem, webbing, patch, seam, eyelet or D-ring.
Specify the edges that carry continuous pull. State whether each edge uses a single hem, double hem or webbing reinforcement.
Put extra material at corners, contact points and repeated fold lines to protect high-wear areas.
State the metal type, inside size, exact position and spacing. Add the related hook, rope or strap method.
Include roller pockets, cable pockets, front flaps, rear flaps, cut-outs and overlap dimensions in the specification.
Eyelet spacing follows the finished tarp shape and the vehicle’s anchor points. The RFQ must show the distance from each corner, the spacing along every edge and the position of every D-ring or loop. The agreed specification gives the production team one exact layout.
| Area | State in the specification | Why it matters |
|---|---|---|
| Long edges | Eyelet spacing, first and last eyelet distance from each corner, webbing requirement. | Keeps tie-down points aligned with the vehicle rail. |
| Short edges | Eyelet spacing, flap overlap and fastening method. | Closes the front or rear edge in the intended order. |
| Corners | Patch size, hem build and exact hardware position. | Defines the highest-pull fastening points. |
| D-ring rows | Quantity, row position, webbing direction and pull direction. | Sets the strap layout before fabrication begins. |
| Pockets and flaps | Opening size, position, reinforcement and closure detail. | Prevents a finished tarp from missing the truck hardware it must fit. |
A formal supplier drawing is not required to begin. Send a dimensioned hand sketch, vehicle photo, existing tarp photo or fastening-layout sketch. The finished production specification is confirmed after the dimensions and hardware layout are agreed.
Include these items in every bulk finished truck tarp RFQ.
Start with the information you have. A hand sketch or reference photo starts the RFQ. A dimensioned finished specification records the cover, edge system and hardware layout before production.
Finished panels, drops, edge reinforcement and tie-down positions follow the flatbed coverage plan.
Cover shape, cut-outs and reinforced contact areas protect irregular cargo during transport.
Use one approved specification for repeat finished-tarp orders, colours, labels and packing requirements.
Specify roller, cable or rope pockets and all hardware that connects the finished tarp to the operating system.
State the logo area, colour and print requirement together with the finished cover dimensions.
Specify waterproof PVC fabric, reinforced edges and the attachment layout for the specific application.
Finished truck tarps are not selected by GSM alone. The cut shape, seams, hems, reinforcement, hardware and attachment layout define how the cover fits and works on the truck.
| Specification item | What to define |
|---|---|
| Cover shape | Rectangular, multi-panel, flap, drop, cut-out or custom profile. |
| Fabric | PVC-coated polyester, selected weight from 450–900 GSM and required colour. |
| Edges | Hem type, webbing, reinforced corners, wear strips and welding detail. |
| Fittings | Eyelets, D-rings, loops, hooks, ropes, straps, pockets and their positions. |
| Presentation | Logo, printing area, label, SKU and export packing requirements. |
Use the supply format that matches your operation. This page focuses on completed custom truck tarps ready for the defined fastening system.
Choose a ready-to-install cover made to the agreed specification.
Choose prepared panels when your own team completes the final assembly or fitting.
Choose roll material when you control cutting, welding, finishing and hardware installation.
| Requirement | Finished custom truck tarp | Standard tarp |
|---|---|---|
| Exact finished size and shape | Specified in the approved specification | Fixed stock dimensions |
| Eyelet and D-ring layout | Placed for the vehicle anchor points | Preset layout |
| Edge and corner build | Specified by wear and pull zones | Standard edge construction |
| Flaps, pockets and cut-outs | Included where the system needs them | Normally not included |
| Logo, label and packing | Defined for the program | Standard presentation |
State the finished tarp size, including hems, drops and flaps. Raw fabric dimensions do not define the completed cover.
Material weight does not define the hem, webbing, corner build or hardware layout. Include the full finished specification.
State the eyelet count, spacing, corner offset and metal type in the specification.
Mark every rail-contact point, cargo edge, fold line and high-pull corner that needs added protection.
Show roller pockets, cable pockets, front flaps, rear flaps and cut-outs before the specification is approved.
Approve one finished specification before bulk production. Repeat orders use the same approved layout.
Specify the hem type, webbing, reinforced corners, abrasion strips, welded seams and all high-pull zones. Show the position and size of every reinforced area in the agreed finished specification.
Place eyelets to match the vehicle’s tie-down points. State the distance from each corner, the spacing on every edge, the metal type and the related rope, hook or strap method.
Include finished dimensions or a reference sketch, material weight, colour, cover shape, edge build, eyelet and D-ring layout, pockets, flaps, logo requirement, quantity and packing requirement.
Yes. D-rings, webbing loops, eyelets, rope pockets, cable pockets, roller pockets, flaps and cut-outs are specified as part of the finished tarp design.
Custom finished truck tarps use PVC-coated polyester from 450 to 900 GSM. The finished specification defines the material selection together with the edge system and hardware layout.
Buy a finished custom tarp when you need a cover ready to fit the vehicle. Buy PVC fabric rolls when your team handles cutting, welding, reinforcement and hardware installation in-house.